[cisco-voip] 7828H3 upgrade from 8.0.3 to 8.6.2 CUCMBE

[Craig Staffin]

Are the drives the right size?



On Jun 2, 2012, at 9:59 AM, Ryan West <rwest at zyedge.com> wrote:

> Hello,
>  
> I’m having a hell of a time getting this upgrade to complete.  Has anyone had any luck moving to 8.6.2 on the 7828H3?  Here are the steps I’ve taken from following the release notes:
>  
> ·         Install upgrade COP (v1.1)
> ·         Disable Extension Mobility service
> ·         Provide an externally powered USB drive of at least 128GB
> ·         Backup
>  
> I’ve tried the install twice now, it formats the USB drive, puts the config files and RPM’s onto the drive, kills the hardware RAID and reboots.  When it reboots, the installation starts and then complains about not having enough space to create a partition with a generic error.  If the server is rebooted (only option), it restarts with the following GRUB error:
>  
> GRUB loading, please wait…
> Error 22
>  
> My TAC dealings have been frustrating so far as I feel I need to educate about the RU with each engineer I speak to.  I’ve updated the firmware as a last ditch error, but that has not been fruitful either.
>  
> Any suggestions?
>  
> Thanks,
>  
> -ryan
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120602/d87f4021/attachment.html>