[cisco-voip] Odd 79XX Remote Behavior

[Jason Aarons (AM)]

Go onsite and Wireshark/console/logs the back of phone, etc.

Have you tired changing load on phone?  This is CallManager not CME right?

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Tim
Sent: Wednesday, June 06, 2012 11:24 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Odd 79XX Remote Behavior


All,

I have a problem that I think will stump most people.

We have some remote personnel from our main site, building VPN Tunnels using a 2811 to 881 Cisco router.  At their home, they have 794x and 796x phones.  The phones work fine with no issues for periods of time before the phone seems to almost brick.  The screen shows a generic date and time, no softkeys, no extensions.  CUCM shows the phone as "registered," but you cannot get to the web interface of the phone.  Switch on the back of the phone continues to work serving connection to the PCs that are hooked up to them.

We then get the phone shipped back to the main site, plug it in, and it comes up with no issues.  We'll ship another phone out, it works great for a period of time, then stops working again.  IP Communicator works fine from remote on these connections.

Any ideas?

Thanks,
Tim


itevomcid
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120606/c09c47ab/attachment.html>