[cisco-voip] dial peer/config to send all calls to one number

[Nick Matthews]

(from memory, may not be 100%)

dial-peer voice 2 pots
port 0/0/0:23
direct-inward-dial
translation-profile incoming SET12345

dial-peer voice 1 voip
destination-pattern 12345
session target ipv4:X.X.X.X
etc

voice translation-profile SET12345
translate called 1

voice translation-rule 1
rule 1 /.*/ /12345/

To change the number all you do is go back to voice translation-rule 1
and change rule 1 to something else.

-nick

On Wed, Jun 6, 2012 at 10:47 AM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
> it's more for a matter of getting it done quickly for testing ACLs, not for
> getting things working in a production environment. a one line config would
> work better for me. ;)
>
> but i see your point.
>
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Cooking with unix is easy. You just sed it and forget it.
>                               - LFJ (with apologies to Mr. Popeil)
>
>
> ________________________________
> From: "Nate VanMaren" <VanMarenNP at ldschurch.org>
> To: "Lelio Fulgenzi" <lelio at uoguelph.ca>, "cisco-voip at puck.nether.net
> (cisco-voip at puck.nether.net)" <cisco-voip at puck.nether.net>
> Sent: Wednesday, June 6, 2012 10:41:48 AM
> Subject: RE: [cisco-voip] dial peer/config to send all calls to one number
>
>
> “i'd like to avoid having to setup translations and the like.” Why?
>
>
>
> On every gateway I setup these basic things, and adjust for the country.
> Some sites there is a direct mapping between DID and extension, some it’s
> random.  I do that all on the gateway so it will work in SRST too.  I have
> moved from H.323 to SIP for all new gateways, but there is some stuff in
> here that allows for both.  (CM h.323 doesn’t send the +)
>
>
>
> I gave up on trying to use MGCP on a SRST box for the trunks a long time
> ago.  I do use MGCP for the FXS ports, because SCCP doesn’t do Protocol
> based T.38.
>
>
>
>
>
> trunk group PSTN
>
> translation-profile incoming FROMPSTN
>
> translation-profile outgoing TOPSTN
>
> voice translation-rule 10
>
> rule 1 /\(^9994870120\)/ /+1\1/
>
> rule 100 /\(^9995472[23]..\)/ /+1\1/
>
> !
>
> voice translation-rule 11
>
> rule 1 /\(.*\)/ /+1\1/ type national national
>
> rule 2 /\(.*\)/ /+\1/ type international international
>
> !
>
> voice translation-rule 15
>
> rule 1 /^1/ // type any national plan any isdn
>
> rule 2 /^\+1/ // type any national plan any isdn
>
> rule 4 /^\+/ // type any international plan any isdn
>
> !
>
> voice translation-rule 16
>
> rule 1 /^011/ /011/ type any unknown plan any unknown
>
> rule 2 /^9011/ /011/ type any unknown plan any unknown
>
> rule 3 /^\+1/ /1/ type any national plan any isdn
>
> !
>
> !
>
> voice translation-profile FROMPSTN
>
> translate calling 11
>
> translate called 10
>
> !
>
> voice translation-profile TOPSTN
>
> translate calling 15
>
> translate called 16
>
>
>
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
> Sent: Wednesday, June 06, 2012 8:26 AM
> To: cisco-voip at puck.nether.net (cisco-voip at puck.nether.net)
> Subject: [cisco-voip] dial peer/config to send all calls to one number
>
>
>
>
> i'm trying to do some testing and I'd like something simple to send all
> calls that come in from a PRI during SRST (i.e. H323) to one extension.
>
> Would I use a voice-port config as follows?
>
> voice-port 0/0/1:23
>  connection plar 12345
>
> -or- would I use a dial-peer config as follows?
>
> dial-peer voice 902 pots
>  incoming called-number .
>  direct-inward-dial
>  port 0/0/1:23
>
> if dial-peer, what other command would I use to send the call to extension
> 12345?
>
> i'd like to avoid having to setup translations and the like.
>
>
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Cooking with unix is easy. You just sed it and forget it.
>                               - LFJ (with apologies to Mr. Popeil)
>
>
>
> NOTICE: This email message is for the sole use of the intended recipient(s)
> and may contain confidential and privileged information. Any unauthorized
> review, use, disclosure or distribution is prohibited. If you are not the
> intended recipient, please contact the sender by reply email and destroy all
> copies of the original message.
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>