[cisco-voip] dial peer/config to send all calls to one number

[Erick Wellnitz]

You could also do a conection plar on the voice port.

On Wed, Jun 6, 2012 at 3:53 PM, Nick Matthews <matthnick at gmail.com> wrote:

> (from memory, may not be 100%)
>
> dial-peer voice 2 pots
> port 0/0/0:23
> direct-inward-dial
> translation-profile incoming SET12345
>
> dial-peer voice 1 voip
> destination-pattern 12345
> session target ipv4:X.X.X.X
> etc
>
> voice translation-profile SET12345
> translate called 1
>
> voice translation-rule 1
> rule 1 /.*/ /12345/
>
> To change the number all you do is go back to voice translation-rule 1
> and change rule 1 to something else.
>
> -nick
>
> On Wed, Jun 6, 2012 at 10:47 AM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
> > it's more for a matter of getting it done quickly for testing ACLs, not
> for
> > getting things working in a production environment. a one line config
> would
> > work better for me. ;)
> >
> > but i see your point.
> >
> >
> > ---
> > Lelio Fulgenzi, B.A.
> > Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> > (519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
> > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> > Cooking with unix is easy. You just sed it and forget it.
> >                               - LFJ (with apologies to Mr. Popeil)
> >
> >
> > ________________________________
> > From: "Nate VanMaren" <VanMarenNP at ldschurch.org>
> > To: "Lelio Fulgenzi" <lelio at uoguelph.ca>, "cisco-voip at puck.nether.net
> > (cisco-voip at puck.nether.net)" <cisco-voip at puck.nether.net>
> > Sent: Wednesday, June 6, 2012 10:41:48 AM
> > Subject: RE: [cisco-voip] dial peer/config to send all calls to one
> number
> >
> >
> > “i'd like to avoid having to setup translations and the like.” Why?
> >
> >
> >
> > On every gateway I setup these basic things, and adjust for the country.
> > Some sites there is a direct mapping between DID and extension, some it’s
> > random.  I do that all on the gateway so it will work in SRST too.  I
> have
> > moved from H.323 to SIP for all new gateways, but there is some stuff in
> > here that allows for both.  (CM h.323 doesn’t send the +)
> >
> >
> >
> > I gave up on trying to use MGCP on a SRST box for the trunks a long time
> > ago.  I do use MGCP for the FXS ports, because SCCP doesn’t do Protocol
> > based T.38.
> >
> >
> >
> >
> >
> > trunk group PSTN
> >
> > translation-profile incoming FROMPSTN
> >
> > translation-profile outgoing TOPSTN
> >
> > voice translation-rule 10
> >
> > rule 1 /\(^9994870120\)/ /+1\1/
> >
> > rule 100 /\(^9995472[23]..\)/ /+1\1/
> >
> > !
> >
> > voice translation-rule 11
> >
> > rule 1 /\(.*\)/ /+1\1/ type national national
> >
> > rule 2 /\(.*\)/ /+\1/ type international international
> >
> > !
> >
> > voice translation-rule 15
> >
> > rule 1 /^1/ // type any national plan any isdn
> >
> > rule 2 /^\+1/ // type any national plan any isdn
> >
> > rule 4 /^\+/ // type any international plan any isdn
> >
> > !
> >
> > voice translation-rule 16
> >
> > rule 1 /^011/ /011/ type any unknown plan any unknown
> >
> > rule 2 /^9011/ /011/ type any unknown plan any unknown
> >
> > rule 3 /^\+1/ /1/ type any national plan any isdn
> >
> > !
> >
> > !
> >
> > voice translation-profile FROMPSTN
> >
> > translate calling 11
> >
> > translate called 10
> >
> > !
> >
> > voice translation-profile TOPSTN
> >
> > translate calling 15
> >
> > translate called 16
> >
> >
> >
> > From: cisco-voip-bounces at puck.nether.net
> > [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
> > Sent: Wednesday, June 06, 2012 8:26 AM
> > To: cisco-voip at puck.nether.net (cisco-voip at puck.nether.net)
> > Subject: [cisco-voip] dial peer/config to send all calls to one number
> >
> >
> >
> >
> > i'm trying to do some testing and I'd like something simple to send all
> > calls that come in from a PRI during SRST (i.e. H323) to one extension.
> >
> > Would I use a voice-port config as follows?
> >
> > voice-port 0/0/1:23
> >  connection plar 12345
> >
> > -or- would I use a dial-peer config as follows?
> >
> > dial-peer voice 902 pots
> >  incoming called-number .
> >  direct-inward-dial
> >  port 0/0/1:23
> >
> > if dial-peer, what other command would I use to send the call to
> extension
> > 12345?
> >
> > i'd like to avoid having to setup translations and the like.
> >
> >
> >
> > ---
> > Lelio Fulgenzi, B.A.
> > Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> > (519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
> > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> > Cooking with unix is easy. You just sed it and forget it.
> >                               - LFJ (with apologies to Mr. Popeil)
> >
> >
> >
> > NOTICE: This email message is for the sole use of the intended
> recipient(s)
> > and may contain confidential and privileged information. Any unauthorized
> > review, use, disclosure or distribution is prohibited. If you are not the
> > intended recipient, please contact the sender by reply email and destroy
> all
> > copies of the original message.
> >
> >
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120606/0461a7aa/attachment.html>