[cisco-voip] CAD login screen, extension box.

[Fuermann, Jason]

Roger is implying that CAD should know your extension. Since you can only have one, there should be no need to specify...That's a good question that I've never had. Don't know

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Roger Wiklund
Sent: Friday, June 08, 2012 10:03 AM
To: Jason Aarons (AM)
Cc: Cisco VOIP
Subject: Re: [cisco-voip] CAD login screen, extension box.

I dont get it.

Even if you use EM, you still have to specify an IPCC extension for
the end user, hence the userid is always tied to the same extension.
So userid and password should be enough?

/Roger


On Fri, Jun 8, 2012 at 4:22 PM, Jason Aarons (AM)
<jason.aarons at dimensiondata.com> wrote:
> So for testing I can change the username and extension J Someone sits down
> at desk they can login with Extension Mobility and into CAD with their
> username/extension.
>
>
>
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Roger Wiklund
> Sent: Friday, June 08, 2012 10:09 AM
> To: Cisco VOIP
> Subject: [cisco-voip] CAD login screen, extension box.
>
>
>
>
>
> Stupid question perhaps, but why is there a box for extension nr when
> you login CAD?
> You can only have one IPCC extension for the end user so even have
> that box there?
>
> Thanks
> /Roger
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
> itevomcid
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip