[cisco-voip] Unified Provisioning Manager on CUCM-BE 6K

[Nick]

Thanks Guys, i have installed the VIM client, but totally confused as to
what to do with it, I'm only trying to configure network parameters on this
box?????

Help does not seem to tell me much????

On 12 June 2012 13:06, Erick <ewellnitzvoip at gmail.com> wrote:

> You'll probably need to use the trickiest text editor in the world...vi
>
> Plenty of resources out there to guide you.
>
>
> On Jun 12, 2012, at 6:41 AM, Nick <csvoip at googlemail.com> wrote:
>
> Hi All
>
>
>
> Has anyone installed the CUPM Provisioning Manager on CUCMBE6K in VMware,
> this appears to be the only Linux version available and the docs are not
> great as I do not know Linux can anyone help me with the following for
> configuring the network parameters, especially step 2, 3 and 4, I’m not
> sure how to do this and it doesn’t explain how
>
>
>
> *Configuring the Network Parameters*
>
> To configure the network parameters:
>  ------------------------------
>
> *Step 1 * Open an SSH terminal and login using root/Cisco at 123.
>
>   ------------------------------
>
> *Warning * You must change your root password using the passwd command
> after the installation process. Also, make a note of the initial root
> password (Cisco at 123) as it may be required to perform OS tasks in future.
>  ------------------------------
>
> *Step 2 * Open the file /etc/sysconfig/network-scripts/ifcfg-eth0* *and
> update the device MAC Address, IP Address, and netmask.
>
> *Step 3 * Open the file /etc/sysconfig/network and update the server
> hostname and gateway address.
>
> *Step 4 * Open the file /etc/hosts and add the IP and hostname mapping
> details at the bottom.
>
> *Step 5 * Run the following command from the command prompt:
>
> *hostname* *XXXX*
>
> where *XXXX* is the hostname of the server.
>
> *Step 6 * Run the following command to apply the network configuration
> changes:
>
> service network restart
>
> *Step 7 * Run the following commands to make all changes permanent:
>
> /opt/system/bin/carssh -s /opt/system/etc/carscli/default/main_tree.par -c
> write mem
>
> *Step 8 * Shut down the VM instance.
>
> *Step 9 * Power off and then power on the VM instance from VSphereClient.
> To do this, choose *Inventory > Virtual Machine > Power.*
>
> * *
> Regards
>
> Nick
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120612/fe3b2c62/attachment.html>