[cisco-voip] odd phone behavior moving between clusters

[Erick Wellnitz]

Okay...more odd behavior.

I have the same firmware load on my 6.1 cluster and my 8.6 cluster.  I can
move a phone from 6.1 to 8.6 without any issue but moving back requires a
factory reset.

That isn't a good thing if for some reason I have to swing phones back to
the old cluster during the cutover.


Any ideas?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120615/1ab03fc9/attachment.html>