[cisco-voip] 9.2.1 SCCP load codec issue

[Erick]

I now have 9.2.3 on a couple of phones and there are no issues so far.



On Jun 17, 2012, at 9:41 PM, Ted Nugent <tednugent73 at gmail.com> wrote:

> After a client hit CSCtq97254 by enabling recording profiles we went to 9.2.3 and have been running good for almost 2 months
> 
> On Sun, Jun 17, 2012 at 9:18 PM, Jason Aarons (AM) <jason.aarons at dimensiondata.com> wrote:
> Later 9.2.1SR2 has been pretty solid on 7965s, etc. Recent customer deployed about 2500 on this image. I suggest testing 9.2.3 as well..
> 
> Sent from my Android phone using TouchDown (www.nitrodesk.com)
> 
> 
> -----Original Message----- 
> From: Daniel J. Leary [djleary at thiess.com.au]
> Received: Sunday, 17 Jun 2012, 4:54pm
> To: 'Erick' [ewellnitzvoip at gmail.com]; Justin Steinberg [jsteinberg at gmail.com]
> CC: cisco-voip [cisco-voip at puck.nether.net]
> Subject: Re: [cisco-voip] 9.2.1 SCCP load codec issue
> 
> 
> 
> If I were you I’d stay right away from 9.2.1 I had nothing but issues with it, now on 9.2.3 with no issues.
> 
>  
> 
> Had the two bugs below,
> 
>  
> 
> CSCtq48538 Video does not work with CUVA or CUPC because Phone does not send CallStateMessage through CAST connection to PC
> 
> CSCtq97254 Phones advertise g722 even though advertise g722 is disabled
> 
>  
> 
>  
> 
>  
> 
> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Erick
> Sent: Saturday, 16 June 2012 9:00 AM
> To: Justin Steinberg
> Cc: cisco-voip
> Subject: Re: [cisco-voip] 9.2.1 SCCP load codec issue
> 
>  
> 
> CSCtq97254 according to tac
> 
> On Jun 15, 2012, at 5:24 PM, Justin Steinberg <jsteinberg at gmail.com> wrote:
> 
> this is a firmware bug.  upgrade to 9-2-1sr2
> 
> On Fri, Jun 15, 2012 at 4:52 PM, Erick Wellnitz <ewellnitzvoip at gmail.com> wrote:
> 
> Another strange finding...
> 
>  
> 
> I upgraded a couple of 7965 phones to 9.2.1 SCCP load and it was forcing g722 causing a codec mismatch with any other phone dialed.
> 
>  
> 
> How do I get the code to comply with my region settings?  Is there a setting I'm overlooking?  g722 advertisement is disabled on the phones.
> 
>  
> 
> Thanks!
> 
>  
> 
>  
> 
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 
>  
> 
> _____________________________________________________________________
> IMPORTANT - This email and any attachments may be confidential and privileged. 
> If received in error, please contact Thiess and delete all copies.  You may not
> rely on advice and documents received by email unless confirmed by a signed Thiess
> letter.  This restriction on reliance will not apply to the extent that the above email
> communication is between parties to a contract and is authorised under that contract.
> Before opening or using attachments, check them for viruses and defects.  Thiess'
> liability is limited to resupplying any affected attachments.
>  
> 
> 
> 
> itevomcid
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120617/75a487a8/attachment.html>