[cisco-voip] 9951 phones and CUCM 7.1.5 vs 8.6.1

[Ryan Ratliff]

Exactly, the more button is there still but every new feature doesn't get crammed into the same list so you can avoid hitting it 5 times to get to the feature you want.

-Ryan

On Jun 25, 2012, at 4:52 PM, Nate VanMaren wrote:

..But they still use the more button, I think the main difference is the phone adds buttons for other features (video, etc) based upon what is going on, and you can’t control the order of the softkeys.  You enable features, and it puts them on the phone in the correct call states.  In the end I think the new way is much more manageable, although a little less ability to completely control the experience.
 
-Nate
 
From: Ryan Ratliff [mailto:rratliff at cisco.com] 
Sent: Monday, June 25, 2012 2:49 PM
To: Nate VanMaren
Cc: Heim, Dennis; Mark Holloway; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] 9951 phones and CUCM 7.1.5 vs 8.6.1
 
At some point that "More" button just wasn't going to be effective.  New phones, new UI.  New doesn't always mean bad, but it does quite often mean different.
 
-Ryan
 
On Jun 25, 2012, at 3:22 PM, Nate VanMaren wrote:
 
Correct, why keep things consistent, when they can introduce a new way to do the same thing.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmcfg/b06featcon.html


-----Original Message-----
From: Heim, Dennis [mailto:Dennis.Heim at wwt.com] 
Sent: Monday, June 25, 2012 1:13 PM
To: Nate VanMaren; Mark Holloway; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] 9951 phones and CUCM 7.1.5 vs 8.6.1

9951's even on 8.6 don't use softkey templates.

Dennis Heim
Sr. UC Engineer
World Wide Technology
Office: 314.212.1814
Email: dennis.heim at wwt.com
www.wwt.com

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Nate VanMaren
Sent: Monday, June 25, 2012 1:24 PM
To: Mark Holloway; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] 9951 phones and CUCM 7.1.5 vs 8.6.1

Yeah, you can't configure softkeys until 8.6.  They have to be PLKs until 8.6.

I strongly recommend 8.6 for these phones.

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mark Holloway
Sent: Friday, June 22, 2012 7:25 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] 9951 phones and CUCM 7.1.5 vs 8.6.1

Could anyone shed some light as to whether there major feature/functionality differences when running 9951 phones on CUCM 7.1.5-31900 vs 8.6.1-2000?  Thanks.


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.



_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120625/ea5f1879/attachment.html>