[cisco-voip] MGCP Voice Gateway for 2 PUB

[Jason Aarons (AM)]

Spot on.

Sent from my Android phone using TouchDown (www.nitrodesk.com)

-----Original Message-----
From: Lelio Fulgenzi [lelio at uoguelph.ca]
Received: Thursday, 28 Jun 2012, 9:25pm
To: Shaihan Jaffrey [schaehan at gmail.com]
CC: Cisco VOIP [cisco-voip at puck.nether.net]
Subject: Re: [cisco-voip] MGCP Voice Gateway for 2 PUB



As far as I know, MGCP gateways on ISR gateways can only register to one cluster at a time. If you use h323 and gateways, then you can simply point to the router and use dial peers to point to the appropriate cluster.

You can't even register different ports on an ISR to different clusters. MGCP registration is a global command. Something I will miss not using 6608s.

Sent from my iPhone...

"There's no place like 127.0.0.1"

On Jun 28, 2012, at 9:04 PM, Shaihan Jaffrey <schaehan at gmail.com<mailto:schaehan at gmail.com>> wrote:

> We have two seperate MGCP voice gateways for two publishers. Can we
> configure or use one voice gateway for both the publishers for High
> Availability pupose.
>
> Regards.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
> https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip


itevomcid
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120628/ac7ffbfe/attachment.html>