[cisco-voip] Calling Party Number not showing up on some carriers sets (most of the time)

[Erick]

On Mar 1, 2012, at 2:48 PM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:

> Something to review, but I can force a call out the same gateway that calls from the PBX are sent out of and still have Unknown appearing. 
> 
> Very weird.
> 
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Cooking with unix is easy. You just sed it and forget it. 
>                               - LFJ (with apologies to Mr. Popeil)
> 
> 
> From: "Erick" <ewellnitzvoip at gmail.com>
> To: "Lelio Fulgenzi" <lelio at uoguelph.ca>
> Cc: "cisco-voip" <cisco-voip at puck.nether.net>
> Sent: Thursday, March 1, 2012 3:40:55 PM
> Subject: Re: [cisco-voip] Calling Party Number not showing up on some carriers sets (most of the time)
> 
> Been there.
> 
> Verify you have the proper information in the dropdowns in the 'call routing information - outbound calls' section of the PRI/gateway configuration.
> 
> On Mar 1, 2012, at 2:24 PM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
> 
> 
> OK, here's a weird one.
> 
> We have had complaints about calls from our campus showing up as Unknown to a certain (Rogers) carrier. 
> 
> I've done some testing and can replicate the problem using different phones, different gateways, different telco providers (Telus, Bell), etc. All show the same results. Unknown to Rogers customers, but the correct number to other carrier customers (Bell).
> 
> The one anomaly is when an outbound call is placed from one of our legacy PBX phones which are connected to our Cisco system via T1/PRI. Calls from these phones have the correct calling party number displayed on Rogers clients phones.
> 
> I've tried to replicate (albeit one at a time) any difference between the call routing from the HiCom vs the IP phone and no difference in the outcome.
> 
> Anybody have any clue what might be causing this?
> 
> My first thought is that it is a Rogers issue, but the fact that we are sending the number out for a particular group of users and it works fine has me thinking. Could the calls be marked slightly differently and this difference is not recognized by Rogers?
> 
> The problem only started happening a few months ago.
> 
> 
> 
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Cooking with unix is easy. You just sed it and forget it. 
>                               - LFJ (with apologies to Mr. Popeil)
> 
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120301/7dd8a26d/attachment.html>