[cisco-voip] jabber application/directory dial rules post-CUCMv8.6

[Ryan Ratliff]

It's just a matter of the number matching a dial rule, then it's applied.  Is there a particular use case you had in mind for using different rules with one app vs the other?

-Ryan

On Mar 5, 2012, at 10:37 AM, Lelio Fulgenzi wrote:

When looking through the jabber application admin guides, it talks about the directory lookup and application dial rule URLs in which you can load custom rules. It also says that with v8.6 the rules are applied by CUCM and not the client.

My goal was to create separate dial rules for the jabber clients to avoid messing with the default application dial rules in the event we wanted to make something different for those apps that use them, i.e. Communicator(?).

I want to make sure I'm not going down a path I can't maintain in the future.

For those of you with v8.6, can you comment on how the dial rules are created? Can you create different groups of dial rules for different targets? If so, how are those targets defined?

Thanks, Lelio


---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Cooking with unix is easy. You just sed it and forget it. 
                              - LFJ (with apologies to Mr. Popeil)


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120305/4b64138a/attachment.html>