[cisco-voip] meeting place 8 in vmware --welcome prompt not playing

[sourav ......pa$$ion of IT]

 Installed meeting place application server 8 in vmware successfully
(running with default
6 port license)configured the sip trunk between mp & cucm..rp in
cucm...
 configured meeting place part as below...
 1.usage configuration --attendant phone & access phone 1(same as SIP
userID)
 2.media resource--Audio license port available (showing 6 port),adhoc
 audio ports-6
 3.SIP configuration--user id same as access phone 1,sip proxy to cucm pub
& sub
 4.adhoc cucm configuration---enable sccp yes,tftp ip for cucm...it's
showing as registered


 also created conference bridge with mp in cucm ;status
 registered..however when I dial the access number1 form IP phone --the
 number is not dialing ,it's fast busy tone only..
any suggestion/link/checklist would be helpful...

Thanks
Sourav
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120306/c8e6c0a8/attachment.html>