[cisco-voip] Cisco CAD PostInstall.exe

[Mike King]

Obviously, this is not TAC supported, but I did find this:

https://supportforums.cisco.com/thread/2085011

You could also try this:

Use WinDiff on a Pre and Post change box to see registry changes:
http://support.microsoft.com/kb/171780

On Mon, Mar 12, 2012 at 9:11 AM, Michael Rose <mroseatrstone at gmail.com>wrote:

> We’re looking to move some of our agents from one UCCX cluster to another.
> Both clusters are running the same version of software so we figured the
> easiest way to update the settings is to run a PostInstall.exe and update
> the server settings for Agent, rather than uninstalling and reinstalling.*
> ***
>
> ** **
>
> My question is can we simply run the PostInstall.exe with a commandline
> switch for the IPs to make this easier? It will painful to sit at each end
> user’s machine and change this setting. We are thinking we can just use our
> deployment server to accomplish this if there is a switch.****
>
> ** **
>
> If there is aregistry key we can change that would be helpful as well. I
> did a search in the registry and didn’t find anything and running
> PostInstall.exe /? Or /r didn’t do anything for giving me commandline
> switch help or make an unattend file.****
>
> ** **
>
> Thanks.****
>
> ** **
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120312/f773a667/attachment.html>