[cisco-voip] QoS on Multilink T1's

Nick Matthews matthnick at gmail.com
Thu Mar 22 18:55:31 EDT 2012


That's correct.  Best practice is also to use percent commands rather
than hard coding bandwidth so if you lose a link it is still
functional.

-nick

On Thu, Mar 22, 2012 at 4:28 PM, Joseph Mays <mays at win.net> wrote:
>> case, I have the service-policy for QoS in the multilink interface
>> definition, but on the individual T1's themselves.
>
>
> Sorry, that should have read, "I have the service-policy for QoS in the
> multilink interface definition, but NOT on the individual T1's themselves.
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip


More information about the cisco-voip mailing list