[cisco-voip] IPVC 3515 no Video

[george.hendrix at l-3com.com]

Can anyone offer a suggestion on what to check for no multi-point video with a IPVC-3515?  Users are able to dial into the conference, the first user can see remote video (of themselves) from the MCU but subsequent users don't see or receive any video, nor can they be seen.

Thanks,
Bill


From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of george.hendrix at l-3com.com
Sent: Wednesday, March 21, 2012 11:27 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] IPVC 3515 no Video

Hi everyone,

  I am trying to setup an IPVC 3515-12 on a CUCM 8.5 cluster.  Currently, I am able to call into the conference number I setup and the first caller can see the video being returned back.  However, all subsequent callers receive an error and they don't see any video, nor can they be seen by anyone else.  The IPVC audio conference bridge is registered in CUCM and the EMP shows on the MCU page under the Media Processing tab.  Anyone have a suggestion on what to check for this issue?

MCU Version: 5.1.0.0.17
EMP Version: 5.1.1.0.12
CUCM Version: 8.5.1.12900-7

Thanks,
Bill

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120327/fa83a0bd/attachment.html>