[cisco-voip] Cisco ATA 186 - Migration to CUCM 8.6
Kjartan Friðjónsson
kjartan.fridjonsson at simnet.is
Mon May 7 09:31:17 EDT 2012
Hi,
ATA firmware will have to be of the latest version and should have been upgraded prior to migration.
There is an issue with some boxes that require the config to be less than 4 KB, whitch requires some editing on the config files and manual interventions.
Re
Kjartan
----- Original Message -----
From: Joshua Morgan
To: Thierry De Vriendt
Cc: <cisco-voip at puck.nether.net>
Sent: Saturday, May 05, 2012 12:40 AM
Subject: Re: [cisco-voip] Cisco ATA 186 - Migration to CUCM 8.6
Ethereal? Ol' skool! :-)
Sent from my iPhone
On 04/05/2012, at 19:36, "Thierry De Vriendt" <thierry at autempspourmoi.be> wrote:
Hello,
We are currently moving some Cisco ATA 186 from our old CCM 4 to CUCM 8.6
The ATAs use Skinny.
We have the following issues:
<!--[if !supportLists]-->1) <!--[endif]-->If we change the option 150 (TFTP server) in the DHCP server to the new CUCM, it doesn’t work, the ATA still registers to the old CCM.
<!--[if !supportLists]-->2) <!--[endif]-->Even after a restore to factory settings, the ATA still registers to the old CCM.
If we take ethereal traces, we can see the ATA requests his configuration file to the new CUCM and the TFTP server sends the file. Then the ATA sends a register message to the old CCM.
Does anybody have already experienced similar behavior?
Thanks.
Thierry
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
------------------------------------------------------------------------------
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120507/5d3d588d/attachment.html>
More information about the cisco-voip
mailing list