[cisco-voip] can't add gateway to route group when selected in a route pattern

Wes Sisk wsisk at cisco.com
Thu May 10 15:27:02 EDT 2012


That is correct in so far as it has been that way since version 2.4.

A gw can be in multiple RG. However, only one route pattern can point directly to a gateway. When that configuration the gw is not available for addition to a RG.

/wes

On May 10, 2012, at 3:18 PM, Lelio Fulgenzi wrote:


Something that I've been wondering for a while is why, if I assign a gateway to a route pattern, can I no longer assign it to a route group? I like to be able to test trunks individually using special codes, i.e. *9-01-01-number for the first trunk group location and the first trunk. But to do this, I have to create route groups for _each_ trunk first.

Anyone come up with a better way to be able to test each trunk? That is, without having to modify things for each test?

Lelio


---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Cooking with unix is easy. You just sed it and forget it. 
                              - LFJ (with apologies to Mr. Popeil)


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120510/d4dfd339/attachment.html>


More information about the cisco-voip mailing list