[cisco-voip] SIP Trace via CLI

[Anthony Holloway]

I'm not sure why you have a requirement to do real-time versus post call
(maybe you cannot download files to your PC?), but collecting CCM traces
after the call ends, and populating TranslatorX with those traces is an
awesome troubleshooting method.

The filtering combined with the ladder diagrams makes this tool fantastic.
 And it does more than just SIP.

Link:  http://www.employees.org/~pgiralt/TranslatorX/

Also, on a related topic, if you need to collect SIP traces from a CUBE
that has a lot of traffic on it, check out page 42 of this slide deck for a
solution:

https://supportforums.cisco.com/docs/DOC-17616

Anthony Holloway

On Fri, May 11, 2012 at 8:19 AM, Roger Wiklund <roger.wiklund at gmail.com>wrote:

> Hi
>
> Is there any way to do a realtime SIP trace in the UCM CLI?
>
> Thanks!
>
> /Roger
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120511/bad803f9/attachment.html>