[cisco-voip] SIP Trace via CLI

[Wes Sisk]

SIP session trace as part of RTMT:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/service/8_5_1/rtmt/rtconfcm.html#wp1330143

There is also Analysis Manager:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/service/8_0_2/rtmt/ch1_overview.html

These are less realtime but provide more comprehensive overview of call flow.

Regards,
Wes

On May 11, 2012, at 11:14 AM, Anthony Holloway wrote:

I'm not sure why you have a requirement to do real-time versus post call (maybe you cannot download files to your PC?), but collecting CCM traces after the call ends, and populating TranslatorX with those traces is an awesome troubleshooting method.

The filtering combined with the ladder diagrams makes this tool fantastic.  And it does more than just SIP.

Link:  http://www.employees.org/~pgiralt/TranslatorX/ 

Also, on a related topic, if you need to collect SIP traces from a CUBE that has a lot of traffic on it, check out page 42 of this slide deck for a solution:

https://supportforums.cisco.com/docs/DOC-17616

Anthony Holloway

On Fri, May 11, 2012 at 8:19 AM, Roger Wiklund <roger.wiklund at gmail.com> wrote:
Hi

Is there any way to do a realtime SIP trace in the UCM CLI?

Thanks!

/Roger
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120514/be336692/attachment.html>