[cisco-voip] c series CMIC help

[Erick Wellnitz]

I think I found my answer buried in the installation and service guide.

On Mon, May 14, 2012 at 9:08 AM, Erick Wellnitz <ewellnitzvoip at gmail.com>wrote:

> Okay....my google fu is off again.  ;)
>
> I was attepting to set up my C210's last week and I'm having some issue
> with the CIMC.  It reports as version 1.5 but I cannot find any
> documentation on initial configuration of 1.5
>
> I have this:
> http://www.cisco.com/en/US/customer/products/ps10493/products_configuration_example09186a0080b10d66.shtml
>
> BUT, there are added fields in 1.5 such as Shared LOM, Cisco Card,
> standalone, active/active, active/passive, etc....
>
> It woldn't get a DHCP address, it wouldn't work with a static address...it
> shows a LOT of activity when plugged into the network.  I could change and
> save settings from the initial setup screen but that is it.
>
> Any ideas or documentation for this version?
>
> Thanks!
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120514/bd1a0382/attachment.html>