[cisco-voip] Matich dial-peers on trunk group or caller id

[Ted Nugent]

You could also match on incoming called-number on the inbound pots
dialpeer, then use translation profiles to prefix something that will match
your outbound dialpeers for the outbound trunkgroup.

dial-peer voice 200 pots
 incoming called-number 91955512..
 direct-inward-dial
translation-profile incoming AddInboundPrefix
 trunkgroup PRI1



On Thu, May 17, 2012 at 3:35 PM, Joseph Mays <mays at win.net> wrote:

> I want to route all incoming calls from a particular trunk to be outgoing
> calls on another specific trunk group. Is there any way, in a dial-peer
> entry, to match on caller ID or incoming trunk group, rather than
> destination-pattern?
>
> ______________________________**_________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/**mailman/listinfo/cisco-voip<https://puck.nether.net/mailman/listinfo/cisco-voip>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120518/caba1838/attachment.html>