[cisco-voip] Phone load for IP Communicator

[Wes Sisk]

it is not stored in the sql database so no 'run sql...'
endpoints do report it to ccm in the signaling stream during registration. that gets passed to syslog sometimes:

grep " Name=ipc." CiscoSyslog 
May 14 15:10:32 CMPUB local7 3 : 36202: May 14 22:10:32.983 UTC :  %CCM_CALLMANAGER-CALLMANAGER-3-StationEventAlert: Station alert. Protocol:SCCP TCP ProcessID:1.100.9.39404 Device Text:7: Name=ipc.xxxxx Load= 7.0.5.1 TFTP Timeout Param1:0 Param2:0 App ID:Cisco CallManager Cluster ID:StandAloneCluster Node ID:NNNN

or in ccm sdi traces:
grep -i "alarm.*ipc" ccm*.txt | head -n 1
ccm00000362.txt:05/14/2012 14:53:48.179 CCM|StationInit: (0001613) alarmSeverity=2 text="14: Name=ipc.XXXXX Load= 7.0.5.1 Last=UCM-closed-TCP" parm1=0(0) parm2=0(0).

Regards,
Wes

On May 21, 2012, at 1:34 PM, Scott Voll wrote:

Is there a Run statement that can be ran (on CM 7.1) to see what IPC devices are running which version of IPC software?

In RTMT starting in 8.6 we can see it real time.  It would be nice to see this info as to what the last phone load was when they logged in last.

TIA

Scott
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip