[cisco-voip] Change Platform Username CM 8.5

[Craig Staffin]

how do you add an OS admin account?  Is it from the CLI?


On Tue, May 22, 2012 at 9:59 AM, Heim, Dennis <Dennis.Heim at wwt.com> wrote:

> I believe the best way is to add a OS Admin account under the username
> that you want. Not all the UC apps let you do this but CUCM and CUC, do if
> I remember.****
>
> ** **
>
> Dennis Heim****
>
> Sr. UC Engineer****
>
> World Wide Technology****
>
> Office: 314.212.1814****
>
> Email: dennis.heim at wwt.com****
>
> www.wwt.com****
>
> ** **
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Craig Staffin
> *Sent:* Tuesday, May 22, 2012 9:47 AM
> *To:* Cisco Voice
> *Subject:* [cisco-voip] Change Platform Username CM 8.5****
>
> ** **
>
> Is there a way to change the Platform Administrator username after install?
> ****
>
> ** **
>
> Currently running CM 8.5****
>
> ** **
>
> Have tried the PWrecovery tool but that will only change the password and
> not the username****
>
> ** **
>
> Also tried the reset commands within the CLI but that only changes the
> admin interface for CM.****
>
> ** **
>
> Any other ideas?****
>
>
> Craig Staffin****
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120522/0bfff64f/attachment.html>