[cisco-voip] CUCME Call Forward CallerID

[Abebe Amare]

on the Call Routing Information - Outbound Calls section of the  trunk
configuration page, set the Calling Party Selection parameter to First
Redirect Number (External).

Abebe

On Wed, May 23, 2012 at 5:37 PM, Scott Voll <svoll.voip at gmail.com> wrote:

> I'm taking a guess here but I would guess that it would be on the outbound
> calls part of your SIP Trunk.  Maybe the calling party selection*
>
> Scott
>
> On Wed, May 23, 2012 at 4:11 AM, Alexander Fossa <alex.fossa at xifos.net>wrote:
>
>>   Hi,
>>
>>  We've got a situation where we need to forward calls incoming over a
>> SIP trunk back out via the same sip trunk.
>>
>>  All works fine, however how can we set the source callerID of the call
>> to be the same as if the extension were to dial an outside call.
>>
>>  For example
>>
>>  01234567890 calls in, and extension 201 has it set to call forward to
>> 077777777777. The receiving party see's the caller ID of the person called
>> it. How can we force it to be the caller id of the last-redirecting
>> extension?
>>
>>  Thanks,
>>
>>  Alex
>>
>>
>>
>>
>>
>> --
>> This message has been scanned for viruses and dangerous content by the
>> Xifos Limited e-mail system.
>> Further information can be found at www.xifos.net
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120524/92c681e4/attachment.html>