[cisco-voip] Caller ID restrictions and Unity Connection

Tue Nov 6 12:48:00 EST 2012

Couldn't you do a translation profile on the SIP gateway so it doesn't say anonymous.

Dennis Heim | Sr. UC Engineer
World Wide Technology | 314.212.1814 | dennis.heim at wwt.com<mailto:dennis.heim at wwt.com>
"Creating Impact, Ignition & Scalability"

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Kenneth Hayes
Sent: Tuesday, November 06, 2012 12:35 PM
To: Eric Pedersen
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Caller ID restrictions and Unity Connection

I know on the hunt pilot you can play around with Caller ID stuff but I don't know if that's helpful or not.
Sent from my iPhone
Thanks,
Kenneth W. Hayes

On Nov 6, 2012, at 12:26 PM, Eric Pedersen <PedersenE at bennettjones.com<mailto:PedersenE at bennettjones.com>> wrote:
They are calls from the PSTN into CUCM and route to the Unity hunt list so there is no route list involved.

From: Kenneth Hayes [mailto:kennethwhayes at gmail.com]
Sent: 06 November 2012 10:17 AM
To: Eric Pedersen
Cc: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Subject: Re: [cisco-voip] Caller ID restrictions and Unity Connection

Do have the restriction set on the route list?
Sent from my iPhone
Thanks,
Kenneth W. Hayes

On Nov 6, 2012, at 12:13 PM, Eric Pedersen <PedersenE at bennettjones.com<mailto:PedersenE at bennettjones.com>> wrote:
Is there a way to get calls to Unity Connection to obey calling line ID presentation restrictions? We're setting a dummy calling number of 999-999-9999 on our gateways (SIP) for calls coming in on our PRIs with no calling number. I did this because we need to filter calls in CUCM based on calling number, and the SIP gateways by default seem to set the caller to "anonymous" when there is no calling number. Without the gateway translation to set this dummy number, these calls were not making it through the calling number translation patterns.

On the matching calling number translation pattern I set the calling line ID presentation to Restricted and it correctly shows Private on phones but the voicemail shows the dummy calling number. The CUCM logs show that it is sending the calling number to CUCX.

The dummy number translations on the gateway are a bit convoluted to me so if there is a better way to do this, please let me know.

This is CUCM and CUCX 8.6 with a SCCP integration.

Thanks,
Eric

The contents of this message may contain confidential and/or privileged

subject matter. If this message has been received in error, please contact

the sender and delete all copies. Like other forms of communication,

e-mail communications may be vulnerable to interception by unauthorized

parties. If you do not wish us to communicate with you by e-mail, please

notify us at your earliest convenience. In the absence of such

notification, your consent is assumed. Should you choose to allow us to

communicate by e-mail, we will not take any additional security measures

(such as encryption) unless specifically requested.

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip

The contents of this message may contain confidential and/or privileged