[cisco-voip] LDAP Custom Filter

[Russell Chaseling]

Hi,

They are enabled. I think the issue is that Contacts will never sync when the LDAP Attribute for User ID is set to sAMAccountName because when I changed this to telephoneNumber in my lab it then was able to sync the Contacts.

This is not an option for me so if anyone else has had any success I'd like to know

Cheers

From: Nate VanMaren [mailto:VanMarenNP at ldschurch.org]
Sent: 20 November 2012 00:00
To: Russell Chaseling; cisco-voip at puck.nether.net
Subject: RE: LDAP Custom Filter

Are you contacts "disabled" (UserAccountControl:1.2.840.113556.1.4.803:=2)

From: cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at puck.nether.net> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Russell Chaseling
Sent: Monday, November 19, 2012 4:24 PM
To: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Subject: [cisco-voip] LDAP Custom Filter

Hi All,

Anyone been able to get CUCM 8.6 to sync Active Directory Contacts as well as Users ?

Tried below but still not working:
(&(objectclass=user)(objectclass=contact)(!(objectclass=Computer))(!(UserAccountControl:1.2.840.113556.1.4.803:=2)))

Cheers
Russell


NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20121120/a1eba01b/attachment.html>