[cisco-voip] cross cluster EM

[abbas Wali]

SAD! but can we configure/import CUCM 7 into CUCM 8.5 i.e. on way
operation. users in the CM 7 can login to CM 8 or vice versa.

Thanks

On 29 November 2012 17:21, Abdul Salam . <salamka at gmail.com> wrote:

> System Requirements for EMCC
>
> The following system requirements exist for Cisco Unified Communications
> Manager:
>
> •Cisco Unified Communications Manager, Release 8.0(1) or higher
>
> •Cisco Extension Mobility service
>
> •Cisco Unified Communications Operating System
>
> •Cisco Bulk Provisioning service
>
> •Other call-control entities that support and use the Cisco Extension
> Mobility Cross Cluster configuration; for example, other Cisco Unified
> Communications Manager clusters, EMCC intercluster service profiles, and
> EMCC remote cluster services
>
>
> http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_0_2/ccmfeat/fsemcc.html#wp1071355
>
>
>
>
>
> *---AS*
>
>
>
>
> On Thu, Nov 29, 2012 at 10:48 PM, abbas Wali <abbaseo at gmail.com> wrote:
>
>> Guys,
>>
>> just been handed over a project to configure Cross Cluster Extension
>> Mobility. We have two clusters one is using CUCM 8.5 while the other CUCM
>> 7.1.3.
>>
>> I have seen somewhere that the minimum req. for CCEM is CUCM 8 + .please
>> say thats not correct :(
>>
>> --
>> @bbas..
>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>


-- 
@bbas..
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20121129/7b6dd839/attachment.html>