[cisco-voip] configure VG224 with MGCP and/or SCCP

[Jason Aarons (AM)]

Correct me if wrong, but I understand a problem with VG224 SCCP is lack of standards based T.38.

I've switched to SIP default for my VG224s.  However SIP VG224 breaks shared lines between IP Phones and Analog Polycoms.

I would pick VG224 SCCP over VG224 MGCP if SIP wasn't a option.

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Eric Pedersen
Sent: Tuesday, October 09, 2012 11:02 AM
To: Heim, Dennis; abbas Wali; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] configure VG224 with MGCP and/or SCCP


If I recall correctly, with SCCP you can only configure fax and modem settings globally and they apply to all ports, but you can configure per-port settings with MGCP.   I don't know if that matters in your particular situation.

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Heim, Dennis
Sent: 08 October 2012 11:55 AM
To: abbas Wali; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] configure VG224 with MGCP and/or SCCP

You can configure each port whatever you want it to be. To be honest ever since, IOS 15, SCCP is the no brainer. Back in the day SCCP sucked for modems, and faxes. In the last couple years I have not had any problems with it. The thing to keep in mind is the SCCP or MGCP will consume an SRST device license.

Dennis Heim
Sr. UC Engineer
World Wide Technology
Office: 314.212.1814
Email: dennis.heim at wwt.com<mailto:dennis.heim at wwt.com>
www.wwt.com<http://www.wwt.com/>

From: cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at puck.nether.net> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of abbas Wali
Sent: Monday, October 08, 2012 1:37 PM
To: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Subject: [cisco-voip] configure VG224 with MGCP and/or SCCP

Hi all,

simple question:

need to configure a VG224 to support fax, modem and a PDQ (credit card machine). looked around, some says SCCP is best some says MGCP. can I configure both i.e. 12 ports with SCCP and 12 with MGCP.

thanks in advance.

Abbas


itevomcid

The contents of this message may contain confidential and/or privileged

subject matter. If this message has been received in error, please contact

the sender and delete all copies. Like other forms of communication,

e-mail communications may be vulnerable to interception by unauthorized

parties. If you do not wish us to communicate with you by e-mail, please

notify us at your earliest convenience. In the absence of such

notification, your consent is assumed. Should you choose to allow us to

communicate by e-mail, we will not take any additional security measures

(such as encryption) unless specifically requested.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20121009/05894447/attachment.html>