[cisco-voip] fractional T1 vs multiple PRI with fewer PSTN Connectivities

[Lelio Fulgenzi]

Thanks Mike! 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


----- Original Message -----
From: "Mike Norton" <mikenorton at pwsd76.ab.ca> 
To: "Lelio Fulgenzi" <lelio at uoguelph.ca> 
Cc: cisco-voip at puck.nether.net 
Sent: Tuesday, October 9, 2012 12:29:12 PM 
Subject: RE: [cisco-voip] fractional T1 vs multiple PRI with fewer PSTN Connectivities 




That’s the way my Telus PRIs are. They charge separately for the physical pipe and the individual PSTN accesses. The number of simultaneous calls is restricted by the Telco switch according to how many PSTN accesses have been paid for. I don’t “busy out” any of the channels because it appears like calls can come in (or go out) on any channel. 



-- 

Mike Norton 

I.T. Support 

Peace Wapiti School Division No. 76 

Helpdesk: 780-831-3080 

Direct: 780-831-3076 







From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi 
Sent: October-09-12 9:09 AM 
To: Jason Aarons (AM) 
Cc: cisco-voip at puck.nether.net 
Subject: Re: [cisco-voip] fractional T1 vs multiple PRI with fewer PSTN Connectivities 




Thanks Jason. 

By "data" I meant the data portion of the voice service, not actually computer/internet data. 

So, I have a PRI that is for voice and voice only. I pay for the "data" portion and the "voice" portion separately, but it's still just for voice. I think it's a way for the telco to provide stepped volumes of voice channels. You pay for the whole PRI physically (data) but can subscribe to logical portions (voice) separately. 

Wondering if anyone (probably Bell Canada customers) have done this. 

Lelio 


--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


----- Original Message -----


From: "Jason Aarons (AM)" < jason.aarons at dimensiondata.com > 
To: "Lelio Fulgenzi" < lelio at uoguelph.ca >, cisco-voip at puck.nether.net 
Sent: Tuesday, October 9, 2012 11:05:03 AM 
Subject: RE: [cisco-voip] fractional T1 vs multiple PRI with fewer PSTN Connectivities 




So you can split channels between pri-group (pri) and channel-group (data) on a single PRI (I recall voice has to be at bottom channels 1-x and data at top x-23). With MGCP Cisco didn’t support Fractional PRIs, however I have a large customer who has run this configuration since CallManager 5/6 with USLec (now Paetec) for 6 years with no problems, just can’t call TAC saying it’s broke. We never set the Callmanager Service Parameter for busy out, but under the Serial interface we did busy out the DSOs being used for Data and removed ccm-manager config (changes require no mgcp/mgcp). 



Again while it works fine, Cisco doesn’t “support” Fractional MGCPt (yet the CCIE lab could test you on it J ) 





From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi 
Sent: Tuesday, October 09, 2012 10:18 AM 
To: cisco-voip at puck.nether.net 
Subject: [cisco-voip] fractional T1 vs multiple PRI with fewer PSTN Connectivities 







Our PRI server is divided into the data portion and voice portion. These voice portions are called PSTN connectivities. My plan is to maintain 2 PRIs at the remote site for failover but only subscribe to the number of PSTN connectivities they use, which should greatly reduce our costs. 

I'm thinking that because the PSTN connectivities are logical limits imposed by the telco, I won't need to worry about fractional T1 settings and using these out of service service parameters that have been talked about on the list in the past. 

Thoughts? 

Lelio 


--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 



itevomcid
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20121009/d553d3f2/attachment.html>