[cisco-voip] bug with 7962s and shared lines?

[Joe Martini]

Sounds like it might be, " 7942 / 7962 phones go off-hook and then on-hook 400 milliseconds later" http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCto78441.

Joe


On Oct 10, 2012, at 2:22 PM, James Avalos <javalos at adobe.com> wrote:

I've also run into this. I always thought my single number reach config was causing it, but never found anything conclusive.  I'm curious to know whether or not you've solved it...



On Oct 10, 2012, at 10:45 AM, "John Callahan" <jcallaha at willamette.edu> wrote:

> 
> Has anyone else experienced a bug with shared lines on 7962s where every so often one phone will start answering incoming calls and then immediately disconnect?   Resetting the phone that is doing the answering solves the problem, but that solution isn't particularly popular.
> 
> I am sure I had found a bug ID where the "workaround" was to adjust the angle of tilt of the phone to be less than the maximum (as if somehow the handset is "floating" up and down?!)  but now I can't find any reference to this problem or the workaround.  Am wondering if it got fixed either in phone firmware or in CallManager.
> 
> Thanks!
> 
> John
> -- 
> John P. Callahan
> Director of Infrastructure Services
> Willamette University
> 900 State Street, Salem OR 97301
> Voice: 503-375-5495
> 
> 
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip