[cisco-voip] CUCM 8.5 bugg with VG224

[Lelio Fulgenzi]

i believe there are similar start/stop processes for the MGCP side of things. 

i rebooted a router to clear up configuration changes i was making. the whole order of operations is ridiculously important, so sometimes as changes are made things get screwed up. 



--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


----- Original Message -----
From: "Dennis Heim" <Dennis.Heim at wwt.com> 
To: "abbas Wali" <abbaseo at gmail.com> 
Cc: cisco-voip at puck.nether.net 
Sent: Friday, October 12, 2012 4:15:16 PM 
Subject: Re: [cisco-voip] CUCM 8.5 bugg with VG224 




I forgot that you were running MGCP. 



Dennis Heim 

Sr. UC Engineer 

World Wide Technology 

Office: 314.212.1814 

Email: dennis.heim at wwt.com 

www.wwt.com 



From: abbas Wali [mailto:abbaseo at gmail.com] 
Sent: Friday, October 12, 2012 3:50 PM 
To: Heim, Dennis 
Cc: cisco-voip at puck.nether.net 
Subject: Re: [cisco-voip] CUCM 8.5 bugg with VG224 



but this is an MGCP controlled gateway, SCCP should not play any part!! I can though give it a go, its after hours anyway 

Thanks 


On 12 October 2012 20:46, Heim, Dennis < Dennis.Heim at wwt.com > wrote: 



After hours I would try a no sccp, sccp and make sure you have the right version on the sccp. I have seem similar behavior before and it just takes a lot of TLC. 




Dennis Heim 

Sr. UC Engineer 

World Wide Technology 

Office: 314.212.1814 

Email: dennis.heim at wwt.com 

www.wwt.com 



From: abbas Wali [mailto: abbaseo at gmail.com ] 
Sent: Friday, October 12, 2012 3:45 PM 
To: Heim, Dennis 
Cc: cisco-voip at puck.nether.net 




Subject: Re: [cisco-voip] CUCM 8.5 bugg with VG224 





Just did that now. for the node where the gateway and points are reg to. but no change. Just added one more point to check and that one not even gets registered or IP address or anything like that. 

Thanks 
Abbas 


On 12 October 2012 20:38, Heim, Dennis < Dennis.Heim at wwt.com > wrote: 



Under serviceability there should be a service for real time information service. 




Dennis Heim 

Sr. UC Engineer 

World Wide Technology 

Office: 314.212.1814 

Email: dennis.heim at wwt.com 

www.wwt.com 



From: abbas Wali [mailto: abbaseo at gmail.com ] 
Sent: Friday, October 12, 2012 3:33 PM 
To: Heim, Dennis 
Subject: Re: [cisco-voip] CUCM 8.5 bugg with VG224 





reset/restart the gateway/endpoints/mgcp process alot of times but no change. sorry what do you mean by RIS service?? 


On 12 October 2012 20:26, Heim, Dennis < Dennis.Heim at wwt.com > wrote: 



Have you tried resetting/restarting the RIS service? 



Dennis Heim 

Sr. UC Engineer 

World Wide Technology 

Office: 314.212.1814 

Email: dennis.heim at wwt.com 

www.wwt.com 



From: cisco-voip-bounces at puck.nether.net [mailto: cisco-voip-bounces at puck.nether.net ] On Behalf Of abbas Wali 
Sent: Friday, October 12, 2012 3:22 PM 
To: cisco-voip at puck.nether.net 
Subject: [cisco-voip] CUCM 8.5 bugg with VG224 





Guys, 

feels like there is a bug in CUCM 8.5 with Vg224. I have configured end points, they are showing up as rejected but in reality they are working fine can get them to call in and out. and fine with the fax/modems too. Even the RTMT says the end points registered. but CUCM says rejected. also early this week saw endpoints un registered for along time still they were working fine. 

-- 
@bbas.. 




-- 
@bbas.. 




-- 
@bbas.. 




-- 
@bbas.. 
_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20121012/2b1c722a/attachment.html>