[cisco-voip] Avoid Clocking issues with PRI

[Roger Wiklund]

Dunno about the NM, I just use network-clock-select 1 e1 x/y/z and
ensure you have clock source line. That's enough to keep it slips
free.

Regards
Roger

On Tue, Oct 16, 2012 at 10:28 PM, Steven Sarte <steven.sarte at gmail.com> wrote:
> I have two SP's for my PRI's on a 2921 currenty using a
> VWIC3-4MFT-T1/E1.  I opened a Cisco Partner case and they told me you
> can avoid timing slips by using a Network Module PRI, like a
> NM-HDV2-T1/E1 and a VWIC3-4MFT-T1/E1 in the WIC slots.
>
> Has anyone configured this before?  What would the clocking
> configuration look like.  I did open a Cisco TAC case but he was not
> very helpful in his first reply.
>
> Thanks in advance,
> Steven
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip