[cisco-voip] ATA 188's and CUCM 8.6.2

[Buchanan, James]

Nope. 3.5.4 did :-)


James Buchanan | Sr. Network Engineer
Presidio | www.presidio.com
12 Cadillac Drive Suite 130, Brentwood, TN 37027
D: 615.866.5729 | C: 931.797.2326 | F: 615.866.5781 | jbuchanan at presidio.com



PRESIDIO


Follow Us: www.twitter.com/presidio

-----Original Message-----
From: Erick B. [mailto:erickbee at gmail.com]
Sent: Thursday, October 18, 2012 6:39 PM
To: Buchanan, James
Cc: voip puck
Subject: Re: [cisco-voip] ATA 188's and CUCM 8.6.2

Ok, thanks for the confirmation that they work. I'm working on the manual upgrade and the config file trick, did it for  186's stuck on
3.1 in past. Thought 3.2.3 had fix for that.

On Thu, Oct 18, 2012 at 11:32 AM, Buchanan, James <jbuchanan at presidio.com> wrote:
> Try hard-coding the SCCP setting in the ATA web interface. At some point, you'll want to do a manual upgrade of those to 3.2.4.
>
>
> James Buchanan | Sr. Network Engineer
> Presidio | www.presidio.com
> 12 Cadillac Drive Suite 130, Brentwood, TN 37027
> D: 615.866.5729 | C: 931.797.2326 | F: 615.866.5781 |
> jbuchanan at presidio.com
>
>
>
> PRESIDIO
>
>
> Follow Us: www.twitter.com/presidio
>
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Erick B.
> Sent: Thursday, October 18, 2012 6:27 PM
> To: voip puck
> Subject: [cisco-voip] ATA 188's and CUCM 8.6.2
>
> Do ATA 188s work on 8.6.2 SU2a?  Had a couple dozen working on older CCM Version and upgraded to 8.62 and they are not registering. I found document that shows support up to 8.0 and searched google, etc and finding a few hits but no real answers as to if they work or not. The couple hits I found on cisco support forums didn't have any replies.
>
> The ATA's have 3.2.3 firmware on them.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> This message w/attachments (message) is intended solely for the use of the intended recipient(s) and may contain information that is privileged, confidential or proprietary. If you are not an intended recipient, please notify the sender, and then please delete and destroy all copies and attachments. Please be advised that any review or dissemination of, or the taking of any action in reliance on, the information contained in or attached to this message is prohibited.
>