[cisco-voip] ATA 188's and CUCM 8.6.2

[Nate VanMaren]

They work, but you have to get them to a firmware version that can handle the new bigger configuration files (or something along those lines)

-nate

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Erick B.
Sent: Thursday, October 18, 2012 10:27 AM
To: voip puck
Subject: [cisco-voip] ATA 188's and CUCM 8.6.2

Do ATA 188s work on 8.6.2 SU2a?  Had a couple dozen working on older
CCM Version and upgraded to 8.62 and they are not registering. I found
document that shows support up to 8.0 and searched google, etc and
finding a few hits but no real answers as to if they work or not. The
couple hits I found on cisco support forums didn't have any replies.

The ATA's have 3.2.3 firmware on them.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip