[cisco-voip] CUCM Log partition full after CUCM 8.6 SU1 -> SU2 upgrade

[JP Senior]

Hi, all.
Is it possible to wipe logs off an inactive partition or to manually 'zero out' a log partition?  After a CUCM upgrade we're getting flooded with LogPartitionLowWaterMarkExceeded errors on the log partition, size is over 90%.  Previously it was approximately 45%, it appears call manager duplicated the logs during the upgrade but did nothing to remediate the old ones still sitting around.

Warm regards,
-JP Senior

The contents of this message may contain confidential and/or privileged
subject matter. If this message has been received in error, please contact
the sender and delete all copies. Like other forms of communication,
e-mail communications may be vulnerable to interception by unauthorized
parties. If you do not wish us to communicate with you by e-mail, please
notify us at your earliest convenience. In the absence of such
notification, your consent is assumed. Should you choose to allow us to
communicate by e-mail, we will not take any additional security measures
(such as encryption) unless specifically requested.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20121022/168bb247/attachment.html>