[cisco-voip] Audit trail on CM or UC

[Lelio Fulgenzi]

as far as I know, the only audit trail there is is a web page access audit trail which tells you what page someone went to. it doesn't give you a from/to audit, i.e. this data was changed from this to that. 

there are front end management tools that give you that apparently, but then all your changes would have to go through that front end tool. 

an audit trail would be very helpful in troubleshooting. but alas, it's not there. :( 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


----- Original Message -----
From: "Scott Voll" <svoll.voip at gmail.com> 
To: cisco-voip at puck.nether.net 
Sent: Thursday, September 13, 2012 12:12:14 PM 
Subject: [cisco-voip] Audit trail on CM or UC 

What is our ability to audit who made changes to CM or UC? we are looking at giving our Helpdesk basic access, but we would like to know how we can see who made what changes. 


TIA 


Scott 
version 7.1 soon to be 8.6 
_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120913/b53d86e2/attachment.html>