[cisco-voip] CUBE: Rewriting a response from provider and sending it back to CUCM as a 503?

[Jason Burns]

Check the "Stop Rerouting on Unallocated or Unassigned Number" CCM Service
Parameter and set that to False so you'll go to the next item in your Route
List.

-Jason

On Wed, Sep 12, 2012 at 2:53 PM, Robert Kulagowski <rkulagow at gmail.com>wrote:

> OK, I'm now getting a 404 response code, which is fine, but the 404
> back to CUCM 7.1.5 means that the call never drops down to the next
> trunk (our PRIs) for a second attempt.
>
> The docs that I'm reading about header modification says that changing
> SIP response types isn't allowed - I can't change the 404 to a 503
> apparently. (I've already confirmed that a 503 will allow the call to
> fall through the route group to the next trunk).
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120913/f39b0165/attachment.html>