[cisco-voip] Codec assignment

[Scott Voll]

That was it (IPC).... Thanks Jason!

Scott

On Wed, Sep 26, 2012 at 10:43 AM, Jason Aarons (AM) <
jason.aarons at dimensiondata.com> wrote:

> In CIPC it’s the checkmark under Audio > Optimize for Low Bandwidth (it
> really means use G.729)****
>
> ** **
>
> Since G729 is less than 80k in regions it can be used.  Also check any
> dial peers.****
>
> ** **
>
> Is this phone-to-phone or phone-to-gateway, etc?****
>
> ** **
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Chris Ward (chrward)
> *Sent:* Wednesday, September 26, 2012 1:37 PM
> *To:* Scott Voll; cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] Codec assignment****
>
> ** **
>
> ** **
>
> CIPC can force G729 at the device level. Also, if a transcoder or MTP is
> being invoked, it’s region relationship to the 2 devices also comes into
> play. ****
>
> ** **
>
> Regions really only set the max allowed bandwidth per call rather than the
> codec itself. The 8.X and later interfaces do a little better job at
> explaining this.****
>
> ** **
>
> +Chris****
>
> Unity Connection TME****
>
> ** **
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Scott Voll
> *Sent:* Wednesday, September 26, 2012 10:32 AM
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] Codec assignment****
>
> ** **
>
> Where beside the Region / DP can you set the codec for a phone / ExtMob
> user?****
>
> ** **
>
> I have the region / DP setup for G711 but the user is suing G729.****
>
> ** **
>
> CM 7.1.5****
>
> ** **
>
> TIa****
>
> ** **
>
> Scott****
>
>
>
> itevomcid ****
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120926/d9c32b85/attachment.html>