[cisco-voip] quick question about sip and CUBE

[Erick Wellnitz]

If I have two sip trunks from CUCM to CUBE (one which requires MTP and one
which does not) how does the CUBE or CUCM know which trunk settings to use
for inbound calls to CUCM?

Is it best to make all of the inbound settings the same and do all of the
translations on the CUBE or CUCM translation patterns instead of setting
the significant digits?

I'm also remembering someone telling me a while back that if you uncheck
the MTP Required that th etrunk will still allocate MTP if needed.  Is that
correct?  It would allow me to only use the one trunk with translations.

As always, thanks for the help!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130404/d86a48e5/attachment.html>