[cisco-voip] Call quality stats on SIP trunk?

[Mark Holloway]

I know SP CUBE on ASR can do this but I don't think ISR CUBE or ASR Enterprise CUBE does it. From what I can see, ISR CUBE can only send a trap if the configured MOS score falls below a certain threshold but no action is taken. With the Acme Packet SBC I can do real time MOS scoring to CDR's and/or view the MOS score per-call in the Web GUI ladder diagram. If the path to a far-end IP peering point causes the MOS score to fall below the configured threshold the Acme Packet SBC will route new calls to a secondary or tertiary path automatically (called QoS Routing) and send an alarm. For calls coming into the SBC from the peering point on the bad path the SBC sends a SIP 503 back to the carrier so they re-route to the secondary data center. 



On Apr 11, 2013, at 12:05 PM, Robert Kulagowski <rkulagow at gmail.com> wrote:

> Is there a way to get call quality stats on a CUBE in real-time? From reading
> 
> http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/gatecont/ps5640/white_paper_c11-613550.pdf
> 
> It appears that things like MoS are only available using SNMP?
> 
> Thanks.
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130411/e1e5c201/attachment.html>