[cisco-voip] Unity Express 8.6.6 update caller input via CLI or tool ?

[Nate VanMaren]

Did you get this to work?

What I have seen before is bulk edit needs to be submitted before navigating anywhere else.

Also, you may want to consider if you cannot enter the alternate contact number, transfer to a call handler which has x6300

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jason Aarons (AM)
Sent: Sunday, April 14, 2013 8:53 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Unity Express 8.6.6 update caller input via CLI or tool ?

Is there a way in Unity Express to do bulk updates for Caller Input?

I got 300 mailboxes I want to change.  I did the below change in the GUI but don't see the change reflected in show run on the CUE CLI anywhere.

Voice Mail >   Mailboxes > User x > Caller Input Tab > Key 5 Transfer to 6300


 NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130419/d33e73e8/attachment.html>