[cisco-voip] fast busy when phone CFA via CUBE

[Erick Wellnitz]

The CSS should contain outbound PSTN partition in order to do this, correct?

When adding a partition to the CSS I shouldn't have to reset the trunk
should I?


On Thu, Aug 1, 2013 at 9:48 AM, Kenneth Hayes <kennethwhayes at gmail.com>wrote:

> CSS or MTP issue on the trunk?
>
> Sent from my iPhone
>
> On Aug 1, 2013, at 9:36 AM, Erick Wellnitz <ewellnitzvoip at gmail.com>
> wrote:
>
> > I have an issue which is probably very easy to fix but I think I'm
> making it more complex than I need to.
> >
> > I have a Nortel that we are migrating to CUCM 9.1 from.  In the interim,
> we have interated the two using SIP via CUBE.  PSTN gateway is H323.  I
> wouldn't normally do this but decisions get made and we have to deal with
> it.
> >
> > Call from Nortel to IP Phone works fine.  Call forward that same IP
> Phone to a PSTN number and the call connects to the external number as if
> nothing was wrong but the Nortel phone gets dropped with a 'fast busy'.
> >
> > Traces and TAC (626731957) that my colleague opened seem to show a codec
> /capabilities mismatch but I can't find a codec mismatch in the system at
> all and our reporting/monitoring tool shows the call trying to connect as
> G711u on both sides.
> >
> > Is this a situation where an MTP is gong to be necessary or is there a
> way to avoid mandatory MTP?
> >
> > Thanks in advance!
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130801/a2064ec8/attachment.html>