[cisco-voip] bogen tamb pop when user hangs up - vg224

[Jason Aarons (AM)]

You really should use FXO for paging due to a lack of supervisory disconnect. Stacking feedback eliminator usually helps as well, else you got try hanging the phone up via End Call  softkey versus setting the handset mic down hard!

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jason Faraone
Sent: Wednesday, August 07, 2013 4:26 PM
To: 'Erick Wellnitz'; cisco-voip
Subject: Re: [cisco-voip] bogen tamb pop when user hangs up - vg224


I have a few locations with the same setup (VG224 => Tam B) and I don't think I have seen this issue. My dipswitch configuration is (1,2,4,5 = OFF; 3 = ON).

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Erick Wellnitz
Sent: Wednesday, August 07, 2013 3:15 PM
To: cisco-voip
Subject: [cisco-voip] bogen tamb pop when user hangs up - vg224

Anyone ever had an issue where there is a 'pop' after the user hangs up to a Bogen tamb?  We have it connected via a VG224.

The strangest part is that we have another one that is perfect without tweaking anything.


itevomcid
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130807/ed96317a/attachment.html>