[cisco-voip] bogen tamb pop when user hangs up - vg224

Erick Wellnitz ewellnitzvoip at gmail.com
Fri Aug 9 10:22:19 EDT 2013


Yeah, I know.  That is my preference but it wasn't my call.


On Wed, Aug 7, 2013 at 9:27 PM, Jason Aarons (AM) <
jason.aarons at dimensiondata.com> wrote:

> You really should use FXO for paging due to a lack of supervisory
> disconnect. Stacking feedback eliminator usually helps as well, else you
> got try hanging the phone up via End Call  softkey versus setting the
> handset mic down hard!****
>
> ** **
>
> *From:* cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] *On Behalf
> Of *Jason Faraone
> *Sent:* Wednesday, August 07, 2013 4:26 PM
> *To:* 'Erick Wellnitz'; cisco-voip
> *Subject:* Re: [cisco-voip] bogen tamb pop when user hangs up - vg224****
>
> ** **
>
> ** **
>
> I have a few locations with the same setup (VG224 => Tam B) and I don’t
> think I have seen this issue. My dipswitch configuration is (1,2,4,5 = OFF;
> 3 = ON).****
>
> ** **
>
> *From:* cisco-voip [mailto:cisco-voip-bounces at puck.nether.net<cisco-voip-bounces at puck.nether.net>]
> *On Behalf Of *Erick Wellnitz
> *Sent:* Wednesday, August 07, 2013 3:15 PM
> *To:* cisco-voip
> *Subject:* [cisco-voip] bogen tamb pop when user hangs up - vg224****
>
> ** **
>
> Anyone ever had an issue where there is a 'pop' after the user hangs up to
> a Bogen tamb?  We have it connected via a VG224.****
>
>  ****
>
> The strangest part is that we have another one that is perfect without
> tweaking anything.****
>
>
>
> itevomcid ****
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130809/c29a19b4/attachment.html>


More information about the cisco-voip mailing list