[cisco-voip] Calls via H.323 gateway displaying connected party instead of original dialed number

[Dana Tong]

Awesome. That’s great thanks. Just what we were after.

Cheers
Dana


From: Florian Kroessbacher [mailto:florian.kroessbacher at gmail.com]
Sent: Monday, 19 August 2013 3:23 PM
To: Dana Tong
Cc: cisco-voip at puck.nether.net (cisco-voip at puck.nether.net)
Subject: Re: [cisco-voip] Calls via H.323 gateway displaying connected party instead of original dialed number

hy

have you tried this on h323 gw


voice service voip

no supplementary-service h225-notify cid-update

--
Florian Kroessbacher
gmail: florian.kroessbacher at gmail.com<mailto:florian.kroessbacher at gmail.com>


On Mon, Aug 19, 2013 at 2:16 AM, Dana Tong <Dana_Tong at bridgepoint.com.au<mailto:Dana_Tong at bridgepoint.com.au>> wrote:
Good morning,


Would anyone have a quick fix for this problem.


Outbound calls via a H.323 gateway show the connected party instead of the original dialled number.


Have tried setting the “Always Display Original Dialed Number” to True on the Service Parameters but doesn’t keep for transferred calls.


It also screws up the display for extension to extension transfers. Ie 7123 calls 7122 who transfers to 7190 but it shows 7122 on the calling party.


Is there something on the voice gateway that could be sending the caller id back to CUCM? This was an upgrade to the CUCM but I have not made any other changes to the configuration of the voice gateways.


Cheers
Dana





-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130819/37893f9f/attachment.html>