[cisco-voip] traces for remote destinations?

[Erick Wellnitz]

I did get it working.  Set dedicated rerouting CSS with only the outbound
PT defined and unchecked then checked the line association box.

I'm still going to sift through the traces with this info and see what I
can dig up.


On Thu, Aug 22, 2013 at 11:06 AM, Daniel Pagan <dpagan at fidelus.com> wrote:

>  If you’re referring to outbound routing (not matching RemDest w/ calling
> number), then my first step would be to check if digit analysis is being
> attempted to the remote destination -- search for *dd=”<**DialedNumber**>”
> *including quotes. Perhaps the call is failing at DA (wrong rerouting
> css).****
>
> ** **
>
> If you don’t see DA for the destination number, then I’d take a step back
> and see if LineControl is sending the call to the RDP (in addition to the
> user’s phone devices). Marking the 2nd CI in Notepad++ should lead you to
> the LineControl instance located slightly below DA results. The dispatch to
> all devices lines should list all the IP phone devices receiving the call,
> including the RDP.****
>
> ** **
>
> I’ve also found that searching for “*initRemDest*” helps for finding a
> remote destination being dialed.****
>
> ** **
>
> So.. I guess the order should be…****
>
> ** **
>
> **1.       **Traces set to detailed (sorry.. had to say it…)****
>
> **2.       **Use 2nd CI to determine if LineControl is dispatching the
> call to the RDP… if yes then..****
>
> **3.       **Search for “*initRemDest*” – should show what destination is
> being dialed. Also useful if you’re not sure how to find the CI.****
>
> **4.       **Few lines below initRemDest should be the DA results – if
> successful then next is determining the status of the outbound call
> attempt. If no successful DA results are found, then likely a Rerouting CSS
> issue on the profile.****
>
> ** **
>
> Hope this helps****
>
> ** **
>
> *From:* cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] *On Behalf
> Of *Erick Wellnitz
> *Sent:* Thursday, August 22, 2013 11:07 AM
> *To:* cisco-voip
> *Subject:* [cisco-voip] traces for remote destinations?****
>
> ** **
>
> CUCM version 9.1****
>
>  ****
>
> What should I be looking for in the SDL traces to troubleshoot Remote
> Destination issues?  Im not finding anything concrete.****
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130822/4804fea6/attachment.html>