[cisco-voip] Upgrading from UCCX 5.0.2 to 7.0.2 Screen Pop not working

Mon Aug 26 13:59:00 EDT 2013

HI Grace,

I have been watching your request to see if I could offer any assistance.
Today I see your screenshots, so thank you for that.  What is the logic
behind having a rule to check for an Account Number which IS NOT in a list,
where the list is <NA>?  Wouldn't just having no rule at all be more
efficient and easier to understand?  Perhaps it is this rule that is
preventing your action from happening.  Can you uncheck the "Enable Rule"
checkbox to see if it will fire?

On Fri, Aug 23, 2013 at 3:12 PM, Grace Maximuangu <
Grace.Maximuangu at blackbox.com> wrote:

> ** **
>
> >>Goto>>>Voice Contact Workflow****
>
> >>Select Event >>>Answered****
>
> >>Rules of Event>>>Screen Pop****
>
> >>Action of Rule>>>Innotrust****
>
> ****
>
> ** **
>
> >>>Edit Rule Conditions>>>****
>
> ****
>
> ** **
>
> :-:gm****
>
> ** **
>
> Grace Maximuangu****
>
> Voice Solutions Engineer****
>
> *Black Box Network Services*
>
> Cell: 213.268.6342****
>
> grace.maximuangu at blackbox.com****
>
> www.blackbox.com ****
>
> ** **
>
> [image: bbox logo.JPG]****
>
> ** **
>
> *From:* Ryan LaFountain (rlafount) [mailto:rlafount at cisco.com]
> *Sent:* Tuesday, August 20, 2013 7:36 AM
> *To:* Grace Maximuangu; cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] Upgrading from UCCX 5.0.2 to 7.0.2 Screen Pop
> not working****
>
> ** **
>
> Hi Grace, ****
>
> ** **
>
> This sounds like two issues here. The first is that the workflow
> configuration went missing during the upgrade to 7.0(2). There have been a
> couple of issues around this, some known like those listed on page 27 in
> the link below and some unknown where we've never been able to get to the
> bottom of why workflow information wasn't retained after the upgrade. ****
>
> ** **
>
>
> http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_7_0/installation/guide/cad702ccxig-cm.pdf
> ****
>
> ** **
>
> The second issue seems to be that even after you've recreated the
> workflow, the screen pop doesn't work. Can you describe or send screenshots
> of what the workflow configuration is and what the agent is experiencing
> when it 'does not work'? ****
>
> ** **
>
> Thank you, ****
>
> ** **
>
> Ryan LaFountain****
>
> Unified Contact Center****
>
> Cisco Services****
>
> Direct: +1 919 392 9898****
>
> Email: rlafount at cisco.com****
>
> Hours: M – F 9:00am – 5:00pm****
>
> ** **
>
> *From: *Grace Maximuangu <Grace.Maximuangu at BlackBox.com>
> *Date: *Monday, August 19, 2013 4:14 PM
> *To: *"cisco-voip at puck.nether.net" <cisco-voip at puck.nether.net>
> *Subject: *[cisco-voip] Upgrading from UCCX 5.0.2 to 7.0.2 Screen Pop not
> working****
>
> ** **
>
> Please advice, the after the upgrade, workflows had to be manually added,
> but Screen Pop does not work, I just saw a post on Cisco UCCX forum, please
> has anyone ran into the issue and how did this get resolved. And any
> references on how to solve this issue would be highly appreciated****
>
>  ****
>
> CAD is only capable of passing enterprise data to another application. It
> cannot perform database lookups on its own. Your options are:****
>
> 1)    If it is browser-based, you can execute an HTTP POST or GET within
> the integrated browser.****
>
> 2)    If the application will accept it, you can pass an IPC call
> (Inter-Process Communication) to it. This is a formatted UDP packet that
> CAD would send, typically on a loopback address, to a port the other
> application is listening on.****
>
> 3)    If the action can be repeated with a consistent series of key
> strokes, you can call a macro to replay that key sequence, effectively
> paste the data into the correct field, and execute the search.****
>
>  ****
>
> You can use the Cisco Desktop Administrator User Guide for CAD 6.6 for
> Unified CM<http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_7_0/user/guide/cda66ug-cm.pdf>
>  as documentation on how to setup workflows within CAD.****
>
>  ****
>
> You will need to use Enterprise Data to pass the caller ID information (or
> anything else you want CAD to get). This has been covered on the forum many
> times. Here is one example to get you started:
> https://supportforums.cisco.com/message/1047577#1047577****
>
>  ****
>
> Please see the post from Cisco forum ****
>
>  ****
>
> :-:gm****
>
>  ****
>
> Grace Maximuangu****
>
> Voice Solutions Engineer****
>
> *Black Box Network Services*****
>
> [image: bbox logo.JPG]****
>
>  ****
>
> ** **
> ------------------------------
>
> This email and any files transmitted with it are confidential and are
> intended for the sole use of the individual to whom they are addressed.
> Black Box Corporation reserves the right to scan all e-mail traffic for
> restricted content and to monitor all e-mail in general. If you are not the
> intended recipient or you have received this email in error, any use,
> dissemination or forwarding of this email is strictly prohibited. If you
> have received this email in error, please notify the sender by replying to
> this email.****
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130826/9fd57015/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 87636 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130826/9fd57015/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image004.jpg
Type: image/jpeg
Size: 4336 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130826/9fd57015/attachment-0001.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.jpg
Type: image/jpeg
Size: 75220 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130826/9fd57015/attachment-0002.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image005.jpg
Type: image/jpeg
Size: 4336 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130826/9fd57015/attachment-0003.jpg>