[cisco-voip] Add new SUB to Production Cluster 9.1.1.10000-11

[Van Benschoten, Brian]

I found recently this won't work with CUCM 9.0.

Mark Drucker <drucker.mark at gmail.com> wrote:



Hi Alice,
You can install from the 9.0 bootable image and tell it to look for a patch/upgrade as part of the install.

Mark


On Sat, Feb 23, 2013 at 10:19 AM, Alice Borgo <bertacco.alessandro at alice.it<mailto:bertacco.alessandro at alice.it>> wrote:

Hi all,
   I need to add a second SUB on a production Cluster composed of1 PUB + 1 SUB that are in version 9.1.1.10000-11.

But I don't have bootable ISO of 9.1.1.10000-11, because the cluster was upgraded from 9.0 version.

What Can I do?

Thank you for the answer

Regards

Alessandro Bertacco

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip




--
Mark Drucker
(925) 321-5791

________________________________
Important Notice: This email message and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you are not the named addressee, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Core BTS. Core BTS specifically disclaims liability for any damage caused by any virus transmitted by this email.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130223/e6f026ee/attachment.html>