[cisco-voip] Add new SUB to Production Cluster 9.1.1.10000-11

[Wes Sisk]

Thanks Chris,

Yes indeed:
CSCud91310    CUCM Install Guide needs to mention upgrade during install restrictions 

Upgrade with install to later (major.minor) version is now blocked.

-wes

On Feb 25, 2013, at 12:05 PM, Chris Ward (chrward) <chrward at cisco.com> wrote:

I think Ryan confirmed this a month or so ago on this mailer. The change was made in the 8.5 and 8.6 time frame to only allow upgrade during installs within the same minor version. So 9.1.1 -> 9.1.1a is good, but 9.0.1 -> 9.1.1 is no good.
 
+Chris
Unity Connection TME
 
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Wes Sisk (wsisk)
Sent: Monday, February 25, 2013 11:57 AM
To: Alice Borgo
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] R: Add new SUB to Production Cluster 9.1.1.10000-11
 
I'm not aware of anything preventing this path. Can you say more about what was attempted, where the media was sourced, what troubleshooting was done?
 
Regards,
Wes

On Feb 24, 2013, at 5:37 AM, "Alice Borgo" <bertacco.alessandro at alice.it> wrote:

Yes, is correct Van.
 
Is NOT possible use Bootable 9.0 CUCM and use the Patch/Upgrade procedure to go on 9.1.1.10000-11. After some time, the procedure stop with error of "Incompatible version upgrade".
 
So, what can we do?
 
I need to ask Cisco if exist a Bootble version of 9.1.1.10000-11?
 
Thank you.
 
Regards
 
Alessandro
 
Da: Van Benschoten, Brian [mailto:Brian.VanBenschoten at COREBTS.com] 
Inviato: sabato 23 febbraio 2013 21:18
A: Mark Drucker
Cc: Alice Borgo; cisco-voip at puck.nether.net
Oggetto: Re: [cisco-voip] Add new SUB to Production Cluster 9.1.1.10000-11
 
I found recently this won't work with CUCM 9.0. 
 
Mark Drucker <drucker.mark at gmail.com> wrote:
 
Hi Alice,
You can install from the 9.0 bootable image and tell it to look for a patch/upgrade as part of the install.
 
Mark
 

On Sat, Feb 23, 2013 at 10:19 AM, Alice Borgo <bertacco.alessandro at alice.it> wrote:
 
Hi all,
   I need to add a second SUB on a production Cluster composed of1 PUB + 1 SUB that are in version 9.1.1.10000-11.
 
But I don't have bootable ISO of 9.1.1.10000-11, because the cluster was upgraded from 9.0 version.
 
What Can I do?
 
Thank you for the answer
 
Regards
 
Alessandro Bertacco

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip




-- 
Mark Drucker
(925) 321-5791
 
Important Notice: This email message and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you are not the named addressee, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Core BTS. Core BTS specifically disclaims liability for any damage caused by any virus transmitted by this email. 

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
<Mail Attachment.eml>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20130225/29d5749f/attachment.html>